Microvette® APT Automated Processing Tube
Microvette® APT Automated Processing Tube
Language:
Tubes
Different patient groups and collection techniques require different collection systems. With a nominal volume range from 100–600 µl, the capillary blood collection systems product range is one of the most extensive in the entire market. Depending on the requirements, our portfolio includes Microvettes with conical or round bottom inner tubes and the option for various different collection techniques, end-to-end or with a collection rim.
-
Microvette® 500 EDTA K2E, 500 µl, cap violet, flat base 20.1339.100
Microvette® 500 EDTA K2E, capillary blood collection, preparation: K2 EDTA, nominal volume: 500 µl, (LxØ) with cap: 47.6 x 10.8 mm, with print, cap violet, flat base, inner receptacle: cylindrical, 100 piece(s)/case
- Type of preparation:
- K2 EDTA
- Sample volume:
- 500 µl
-
Blood gas capillaries, calcium-balanced lithium heparin, 140 µl 19.930.140
Blood gas capillaries, preparation: calcium-balanced lithium heparin, nominal volume: 140 µl, (LxØ): 75 x 2.3 mm, 200 piece(s)/container
- Type of preparation:
- calcium-balanced lithium heparin
- Sample volume:
- 140 µl
-
Microvette® CB 200 NC, 200 µl, cap violet, push cap, flat base 18.1325
Microvette® CB 200 NC, capillary blood collection, preparation: Trisodium citrate solution (1:4), nominal volume: 200 µl, (LxØ) with cap: 46 x 10.8 mm, cap violet, push cap, flat base, incl. sedimentation pipette, 50 piece(s)/bag
- Type of preparation:
- Trisodium citrate solution (1:4)
- Sample volume:
- 200 µl
-
Microvette® APT 500 EDTA K2E, 500 µl, cap violet, cap, round base 20.1330.100
Microvette® APT 500 EDTA K2E, capillary blood collection, preparation: K2 EDTA, K2E, nominal volume: 500 µl, Ø: 13 mm, with plastic label, cap violet, cap, with pierceable membrane, round base, inner receptacle: cylindrical, non-sterile, 100 piece(s)/case
- Type of preparation:
- K2 EDTA
- Sample volume:
- 500 µl
-
Microvette® CB 200 EDTA K3E, 200 µl, cap red, push cap, flat base 18.1321
Microvette® CB 200 EDTA K3E, capillary blood collection, preparation: K3 EDTA, nominal volume: 200 µl, (LxØ) with cap: 46 x 10.8 mm, cap red, push cap, flat base, 100 piece(s)/bag
- Type of preparation:
- K3 EDTA
- Sample volume:
- 200 µl
-
End-to-end capillary, K2 EDTA, 20 µl, Ø: 1.28 mm, glass 19.447.001
End-to-end capillary, K2 EDTA, capillary blood collection, preparation: K2 EDTA, nominal volume: 20 µl, Ø: 1.28 mm, glass, 100 piece(s)/container
- Type of preparation:
- K2 EDTA
- Sample volume:
- 20 µl
-
Blood gas capillaries, calcium-balanced lithium heparin, 175 µl 19.930.175
Blood gas capillaries, preparation: calcium-balanced lithium heparin, nominal volume: 175 µl, (LxØ): 100 x 2.3 mm, 200 piece(s)/container
- Type of preparation:
- calcium-balanced lithium heparin
- Sample volume:
- 175 µl
-
Microvette® CB 200 NC, 200 µl, cap black, push cap, flat base 18.1325.100
Microvette® CB 200 NC, capillary blood collection, preparation: Trisodium citrate solution (1:4), nominal volume: 200 µl, (LxØ) with cap: 46 x 10.8 mm, cap black, push cap, flat base, incl. sedimentation pipette, 50 piece(s)/bag
- Type of preparation:
- Trisodium citrate solution (1:4)
- Sample volume:
- 200 µl
-
Microvette® APT 250 EDTA K2E, 250 µl, cap red, cap, round base 20.1331
Microvette® APT 250 EDTA K2E, capillary blood collection, preparation: K2 EDTA, K2E, nominal volume: 250 µl, Ø: 13 mm, with plastic label, cap red, cap, with pierceable membrane, round base, inner receptacle: cylindrical, incl. quick-release cap, non-sterile, 50 piece(s)/case
- Type of preparation:
- K2 EDTA
- Sample volume:
- 250 µl
-
Microvette® 500 EDTA K3E, low lead, 500 µl, cap violet, flat base 20.1341.102
Microvette® 500 EDTA K3E, low lead, capillary blood collection, preparation: K3 EDTA, nominal volume: 500 µl, (LxØ) with cap: 47.6 x 10.8 mm, with print, cap violet, flat base, inner receptacle: cylindrical, 100 piece(s)/case
- Type of preparation:
- K3 EDTA
- Sample volume:
- 500 µl
Language:
Blood collection systems for paediatrics
Blood collection systems for paediatrics
Language:
Ordering Information Blood Collection Systems
Ordering Information Blood Collection Systems
Language:
Minivette® POCT
Minivette® POCT
Language:
Micro-Needle
Micro-Needle
Language:
General
-
+
When should the Minivette® POCT be used?
The Minivette® POCT is particularly suitable for the precise recovery and dispensing of defined small whole blood samples. This is especially required for Point-of-Care tests (POCT).
-
+
Why does the Multivette® have two marks, and which one is the filling level mark?
Both marks refer to the filling level. As the Multivette® is held horizontally and tilted slightly while collecting blood, the mark at the bottom of the Multivette® shows the correct filling level. After collection, the capillary tube is emptied through extraction. The filling level of an upright Multivette® can be read by the upper mark.
-
+
Is the Multivette® suitable for venous or capillary blood collection?
Both collection methods are possible with the Multivette®. The capillary tube has been developed so that either capillary blood can be collected directly with the self-filling capillary tube or venous blood can be collected by attaching a safety Luer needle to the capillary tube.
-
+
Why is there no Microvette® with a citrate preparation for coagulation?
Capillary blood is not suitable for coagulation diagnostics. When collecting capillary blood, a certain amount of tissue fluid is also taken. This can result in false measurement values in coagulation analysis.
-
+
Can the Microvette® be completely processed in automated analysers?
There are special carrier tubes available (e.g. product no 55.1570; 55.1572;55.1571) which enable adaptation for analysis systems and centrifuges.There are special carrier tubes available (e.g. product no 55.1570; 55.1572;55.1571) which enable adaptation for analysis systems and centrifuges.
-
+
Which drawing techniques can be used to collect capillary blood with the Microvette®?
When using the Microvette®, the user has a choice of two collection techniques. The blood can either be taken using the pre-assembled end-to-end capillary or with the special rim.
-
+
Does it have an expiry date and, if yes, where can it be found?
Yes, each Microvette® is labelled with an expiry date and lot number.
-
+
Which centrifugation conditions must be taken into account for the Microvette® and Multivette® with serum preparation?
For serum, the optimal conditions are 5 minutes, 10,000 x g at 20°C. The recommended centrifugation conditions are printed on the labels of each inner box and are found on the Sarstedt website under Product Specifications.
-
+
What centrifugation conditions must be taken into account for the Microvette® and Multivette® with serum gel and lithium heparin gel preparations?
For serum gel and lithium heparin gel, the optimal conditions are 5 minutes, 10,000 x g at 20°C. The recommended centrifugation conditions are printed on the labels of each inner box and can be found on the Sarstedt website under Product Specifications.
-
+
What centrifugation conditions must be taken into account for the Microvette® and Multivette® with lithium heparin, fluoride and EDTA?
For lithium heparin, EDTA and fluoride, the optimal conditions are 5 minutes, 2000 x g at 20°C. The recommended centrifugation conditions are printed on the labels of each inner box and can be found on the Sarstedt website under Product Specifications.
-
+
Can the Microvette® also be used for venous blood collection?
The Microvette® has the ideal features for capillary blood collection, but it can also be used for venous blood collection. Alternatively, the prepared micro sample tubes with attached lid or screw cap can be used. These are ideal for venous blood collection.
-
+
Which capillary system can be used to determine ESR?
The Microvette® CB 200 ESR (product no 18.1325) is ideal for measuring blood sedimentation from capillary blood.
-
+
Why are there Microvettes with conical and cylindrical inner tubes?
Microvettes with conical inner tubes provide optimum pipetting of serum and plasma supernatants, even with small amounts of blood. The cylindrical inner tube makes it easier to mix the sample and enables optimal gel separation after centrifugation.
-
+
In what order should capillary blood draws be taken?
The CLSI standard (Clinical and Laboratory Standards Institute) recommends EDTA, heparin, heparin gel, fluoride, serum and then serum gel.
We would like to show you additional content which is hosted by a third party. For this purpose we need your consent to set cookies:
Zentrifugationsbedingungen Microvette® & Multivette® & Mikro-Probengefäße
Zentrifugationsbedingungen Microvette® & Multivette® & Mikro-Probengefäße
Language:
Microvette® CB 200 - ESR
Microvette® CB 300
Multivette® 600
Multivette® 600
Language:
Microvette® 100/200
SARSTEDT Microvette® CB 200 ESR
SARSTEDT Micro sample tubes
SARSTEDT Microvette® CB 300
SARSTEDT Microvette® APT K2E
SARSTEDT Multivette® 600
SARSTEDT Minivette® POCT
SARSTEDT Microvette® Capillary Blood Collection System
SARSTEDT Microvette® CB 200
SARSTEDT prepared tubes for HbA1c testing using Tina-quant®
SARSTEDT prepared tubes for HbA1c testing using Tina-quant®
Downloads:
SARSTEDT Micro sample for blood sugar testing from haemolysate
SARSTEDT Micro sample for blood sugar testing from haemolysate
Downloads:
SARSTEDT micro sample tubes, brillant cresyl blue
Blood Gas Capillaries and Accessories
Prepared Micro Tubes
Prepared Tubes
Multivette® 600
Minivette® POCT
