Sediplus® System Solutions
Sediplus® System Solutions
Language:
Sediplus® Devices
The automatic blood sedimentation system Sediplus® S 200 with 10 measurement positions, and the Sediplus® S 2000 with 40 positions (can optionally be extended to 160 positions) for a high sample throughput, optimise ESR measurement.
-
Barcode scanner, for Sediplus® S 2000 NX 90.1092.730
Barcode scanner, incl. USB connection, for Sediplus® S 2000 NX
-
Sediplus® S 2000 NX, automatic 40-channel blood sedimentation measuring device, incl. Test-Sedivettes for functional tests, 40 measuring stations, 110/230 V 90.1092
Sediplus® S 2000 NX, automatic 40-channel blood sedimentation measuring device, incl. Test-Sedivettes for functional tests, suitable for S-Sedivette®, 40 measuring stations, for measuring the blood cell sedimentation rate (ESR), supply voltage: 110/230 V
-
Thermal printer, for Sediplus® S 2000 NX 90.1092.720
Thermal printer, incl. mains adapter, for Sediplus® S 2000 NX
-
Paper roll, for Thermal printer REF. 90.189.720 & 90.1092.720 90.188.055
Paper roll, for Thermal printer REF. 90.189.720 & 90.1092.720
Language:
General
-
+
Can the Sediplus® S 2000 NX ESR analyser be integrated into an existing LIS system?
Yes, the Sediplus® S 2000 NX can be integrated through an interface.
-
+
Do all the S-Sedivettes have to be placed in the Sediplus® device at the same time?
No, each measuring station can be filled individually / independently of time.
-
+
Is there an option to automatically determine ESR?
Yes, the ESR can be determined automatically with the Sediplus® S 2000 NX (40 measuring stations).
-
+
What must be taken into account when using the S-Sedivette® for blood sedimentation?
For blood sedimentation, the S-Sedivette® should always be carefully mixed after blood collection. According to the CLSI standard, the measurement must be started no later than 4 hours after blood collection. The first reading of the blood sedimentation rate (ESR) should take place after 60 minutes.
-
+
How is the S-Sedivette® prepared?
The S-Sedivette® is prepared with trisodium citrate solution, which is 20% of the nominal volume. This ensures the important ratio for blood sedimentation of 1 part citrate + 4 parts blood.
-
+
What is the shelf life of the S-Sedivette®?
The S-Sedivette® has a shelf life of 15 months.
-
+
Does the S-Sedivette® have to be mixed after blood collection?
Yes, the S-Sedivette® must be mixed thoroughly immediately after blood collection: invert the S-Sedivette® slowly five times. The air bubble / glass bead must always travel to the other end. Do not shake it back and forth quickly. For safety and to save time, we recommend the special Sarmix® M 2000 mixers.
-
+
Are the values from the S-Sedivette® comparable to the Westergren method?
The S-Sedivette® was developed and evaluated for determining the blood sedimentation rate (ESR) according to the Westergren method.
S-Sedivette®
S-Sedivette®
Language:
Instruction Manual Sediplus® Datamanager_90.189.750
Instruction Manual Sediplus® Datamanager_90.189.750
Language:
Instruction Manual Sediplus® S 200_90.189.900
Instruction Manual Sediplus® S 200_90.189.900
Language:
Instruction Manual Sediplus® S 2000, 230V_90.189.700
Instruction Manual Sediplus® S 2000, 230V_90.189.700
Language:
Instruction Manual Sediplus® S 100_90.189.800
Instruction Manual Sediplus® S 100_90.189.800
Language:
Verification of the Sediplus® S 2000 NX Blood Sedimentation Monitor
Verification of the Sediplus® S 2000 NX Blood Sedimentation Monitor
Language:
SARSTEDT Sediplus® S 2000 NX
